Control Panel DCS800

ABB Drives - Control panel door mounting kit, includes DPMP-02 and CDPI-01, Includes the surface mounting control panel platform, and IC65 cover and a 3m panel connection cable. The kit is UL Type 12, and panel bus adapter option.

Ethernet Adapter

ProfiNet IO Adapter

Cable Gland Kit

Cable Gland Kit

CANopen Adapter

ControlNet Adapter

Ethernet to ControlNet Gateway

Fieldbus communication, PSTX Anybus, for communication protocol DviceNet, 1 Port

Fieldbus communication, PSTX Anybus, for communication protocol Modbus-RTU, 1 Port

Fieldbus communication, PSTX Anybus, for communication protocol Modbus TCP, 1-Port.

Fieldbus communication, PSTX Anybus, for communication protocol Modbus TCP, 2-Port

Fieldbus communication, PSTX Anybus, for communication protocol Profibus, 1 Port

ABB Drives - Black panel cover, Blank panel cover

ABB Drives - 115V/230V Digital Input Extension (CHDI-01), Digital input extension module that expands the inputs of the drive control board. It provides 6 inputs at 115/230v and 2 additional relay outputs

ABB Drives - Digital I/O extension CMOD-01, External 24 V DC/AC input and digital I/O extension (2xRO and 1xDO)

ABB Drives - External 24 V AC/DC and digital I/O extension module, External 24 V DC/AC input and isolated PTC interface (PTC input, RO)

ABB Drives - Flange Mounting for R5 Frame - Flange kit is delivered as a separate kit and includes a drip shield (to keep heatsink side as IP55 - UL Type 12)

ABB Drives - Flange Mounting for R1 Frame - Flange kit is delivered as a separate kit and includes a drip shield (to keep heatsink side as IP55 - UL Type 12)

ABB Drives - Flange Mounting for R2 Frame - Flange kit is delivered as a separate kit and includes a drip shield (to keep heatsink side as IP55 - UL Type 12)

ABB Drives - Flange Mounting for R3 Frame - Flange kit is delivered as a separate kit and includes a drip shield (to keep heatsink side as IP55 - UL Type 12)

ABB Drives - Flange Mounting for R4 Frame - Flange kit is delivered as a separate kit and includes a drip shield (to keep heatsink side as IP55 - UL Type 12)

ABB Drives - Flange Mounting for R6 Frame - Flange kit is delivered as a separate kit and includes a drip shield (to keep heatsink side as IP55 - UL Type 12)

ABB Drives - Flange Mounting for R7 Frame - Flange kit is delivered as a separate kit and includes a drip shield (to keep heatsink side as IP55 - UL Type 12)

ABB Drives - Flange Mounting for R8 Frame - Flange kit is delivered as a separate kit and includes a drip shield (to keep heatsink side as IP55 - UL Type 12)

ABB Drives - Flange Mounting for R9 Frame - Flange kit is delivered as a separate kit and includes a drip shield (to keep heatsink side as IP55 - UL Type 12)

ABB DRIVES - ACS255 Option, External LED keypad. Remote keypad that can be added through RJ45 connection. Signal interface: standard 6-way RJ45 connector, Supply input: 10V … 36 VDC, 30mA, RS485 signal: industry standard 2-wire +5V differential, Environmental: operational 0 … 50 °C, Storage: -40°C … 60°C, Relative humidity: < 95% (non condensing), Protection rating: IP54, Max cable length: 20m (unscreened, total length), 100m (screened, twisted pair, total length)

Fieldbus communication, PSTX Anybus, for communication protocol EtherNet/IP, 1 Port.

Fieldbus communication, PSTX Anybus, for communication protocol Ethernet/IP, 2 Port.

Flange Mounting Kit, Frame Size R5

Flange Mounting Kit, Frame Size R6

ABB Drives - Panel bus adapter - Used to connect a remote control panel to the drive, or to connect the control panel or a PC to several drives on a panel bus. The panel bus can have a maximum of 32 nodes. The control panel/PC is the master, while the drives equipped with the communications adapter module are followers.

Drive composer pro

Analog I/O extension 2

DDCS communications board

DDCS communications board

Flange Mounting Kit, Frame Size R1

Flange Mounting Kit, Frame Size R2

Flange Mounting Kit, Frame Size R3

Flange Mounting Kit, Frame Size R4

Modbus adapter FSCA-01

Pressure Compensation Valve

Digital Input Interface

RJ45/DB9 Adapter

The Relay Output Extension module offers three (3) Form C relay outputs numbered RO 4, 5 and 6, rated 2 A maximum current. Switching capcity is 6 A (24 VDC resistive), 1500 VA (250 VAC), Each relay is galvanically isolated from each other (2.5 kVAC, 1 min

The Pulse Encoder Interface module offers a differential or single ended interface for a digital pulse encoder connection. The module is capable of operating from either a 15 or 24 VDC signal with a maximum frequency of 200Hz.

External Keypad including a 3m cable for use with PSE18 to PSE370 Sofstarter

ABB Drives - ACS250 Option, Copy stick, which is used to upload and download the parameters through RJ45 connection. 120/600 V.