Horner - DIN-rail mounted 5-port 10/100 Ethernet switch (unmanaged). 12-48VDC powered, dual-power supply, metal construction

Horner - 9 position Spring-clamp Terminal Block for SmartRail

Horner - 8 positionition Spring-clamp Terminal Block for SmartRail

Horner - IP20 Shielded Ethernet Patch Cable, 2 foot

Horner - DIN-rail mounted 8-port 10/100 Ethernet switch (unmanaged). 12-48VDC powered, dual-power supply, metal construction

Horner - 15 position Spring-clamp Terminal Block for SmartRail

Horner - 10 position Spring-clamp Terminal Block for SmartRail

Horner - Receptacle - Shielded RJ45 female to RJ45 female

Horner - 11 position Spring-clamp Terminal Block for SmartRail

Horner - IP20 Shielded Ethernet Patch Cable, 6 foot

Horner - Optoisolator; AC to VDC signal conditioning. 100-240AC to 3-48VDC. 60Hz, 500mA

Horner - IP68 RJ45 Port Adapter

Horner - Mounting Clamps (qty. 4) for most OCS models - including LX and NX Series

Horner - Field wireable Plug - m12x5 A-coded Male. Requires only wire strippers and screwdriver for field assembly

Horner - Receptacle - m12x5 A-coded Female (IP67) to shielded cable (IP20), 1m

Horner - 0.5m CsCAN Cordset - m12

Horner - Field wireable Plug - m12x5 A-coded Female. Requires only wire strippers and screwdriver for field assembly

Horner - 5M CsCAN Corset -m12

Horner - CsCAN Network Tee - m12

Horner - 2m CsCAN Cordset - m12

Horner - M12 Adapter Plug. Allows the use of m12 cable sets with any CsCAN device

Horner - Receptacle - m12x5 A-coded Male (IP67) to shielded cable (IP20), 1m

Horner - Dual PWM to 10V Analog Converter

Horner - 4 Channel Relay Output (120/250 VAC 10A, 24/30 VDC 10A) adapted from 4 Channel 24V DC 0.5A (Positive Logic)

Horner - Alternate I/O Terminal Blocks (spring clamp) for 104 I/O Board. Recommended for applications when XLe or XLt is mounted on DIN-rail, or applications where spring clamp plugs are desired

Horner - Alternate I/O Terminal Blocks (spring clamp) for 103 I/O Board. Recommended for applications when XLe or XLt is mounted on DIN-rail, or applications where spring clamp plugs are desired

Horner - Accessory kit for HE-X MODELS with 106 IO

Horner - 9 Foot – RJ45 to 5 Pin Cable. Recommended for connection between X-Product and CDHD Drives

Horner - 3 Foot – RJ45 to 5 Pin Cable. Recommended for connection between X-Product and CDHD Drives

Horner - 9 Foot - RJ45 to RJ45 Ethernet patch cable. Recommended for interconnection between CDHD Drives

Horner - 3 Foot - RJ45 to RJ45 Ethernet patch cable. Recommended for interconnection between CDHD Drives

Horner - 900MHz RF Modem Interface

Horner - Dual PWM to 20mA Analog Converter

Horner - Profibus DP Slave option kit. Due to mechanical interference, not comptible with I/O models 100, 104, and 105.

Horner - 57.6k Telephone modem option kit - field installable. Kit includes all parts necessary for internal installation within the XLe case, including a deeper plastic back cover adapted for modem operation.

Horner - Low profile I/O Connectors 4, 5

Horner - Blank I/O board & I/O Connectors

Horner - XLE Dual High Speed Pulse Driver 5VDC

Horner - XLE Dual High Speed Pulse Driver

Horner - 10/100 Ethernet option kit - field installable. Kit includes all parts necessary for internal installation within the XLe case, including a deeper plastic back cover adapted for Ethernet operation.

Horner - 4 Channel 120/250 VAC 2A (Positive Logic) adapted from 4 Channel 24V DC 0.5A (Positive Logic)

Horner - 8 Channel 120/240 VAC Input (Positive Logic) adapted to 8 channel 24V DC Inputs (Positive Logic)

Horner - Four-channel Analog Output I/O option kit, selectable 0-10V, +/-10V, 4-20mA. Due to mechanical interference, not compatible with I/O models 100, 104 and 105. Does not require sharing of MJ1 serial port.

Horner - Two-channel Analog Output I/O option kit, selectable 0-10V, +/-10V, 4-20mA. Due to mechanical interference, not compatible with I/O models 100, 104 and 105. Does not require sharing of MJ1 serial port.

Horner - Power supply 100-240VAC or 140-340VDC Switching supply that outputs 1.5A (HE-X24-AS/AL) at 24VDC. Mounts on Standard DIN rail. Designed for X Family products.

Horner - Power supply 100-240VAC or 140-340VDC Switching supply that outputs 3A (HE-X24-AS/AL) at 24VDC. Mounts on Standard DIN rail. Designed for X Family products.

Horner - Spark Quencher AC/DC loads >0.5A

Horner - Spark Quencher AC/DC loads <0.5A

Horner - Memory Card Reader for HE-MC1. Portable device allows HE-MC1 to be plugged into the USB port of personal computers as a portable hard drive.

Horner - Removable memory card - compatible with XLe. Card capacity typically 2GB.