Moxa - AWK-1137C-JP-T - WLAN AP/Bridge/Client

(0) No Reviews yet
SKU: AWK-1137C-JP-T
Moxa - 802.11n Wireless Client, JP band, -40 to 75°C
$576.50

Product Specifications

WLAN Interface
WLAN Standards
802.11a/b/g/n 802.11i Wireless Security
Modulation Type
DSSS MIMO-OFDM OFDM
Frequency Band for US (20 MHz operating channels)
2.412 to 2.462 GHz (11 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.745 to 5.825 GHz (5 channels)
Frequency Band for EU (20 MHz operating channels)
2.412 to 2.472 GHz (13 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
Frequency Band for JP (20 MHz operating channels)
2.412 to 2.484 GHz (14 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
Wireless Security
WEP encryption (64-bit and 128-bit) WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES) WPA/WPA2-Personal
Transmission Rate
802.11b: 1 to 11 Mbps 802.11a/g: 6 to 54 Mbps 802.11n: 6.5 to 300 Mbps
Transmitter Power for 802.11a
23±1.5 dBm @ 6 to 24 Mbps 21±1.5 dBm @ 36 Mbps 20±1.5 dBm @ 48 Mbps 18±1.5 dBm @ 54 Mbps
Transmitter Power for 802.11b
26±1.5 dBm @ 1 Mbps 26±1.5 dBm @ 2 Mbps 26±1.5 dBm @ 5.5 Mbps 25±1.5 dBm @ 11 Mbps
Transmitter Power for 802.11g
23±1.5 dBm @ 6 to 24 Mbps 22±1.5 dBm @ 36 Mbps 20±1.5 dBm @ 48 Mbps 19±1.5 dBm @ 54 Mbps
Transmitter Power for 802.11n (2.4 GHz)
23±1.5 dBm @ MCS0/8 20 MHz 17±1.5 dBm @ MCS7/15 20 MHz 23±1.5 dBm @ MCS0/8 40 MHz 17±1.5 dBm @ MCS7/15 40 MHz
Transmitter Power for 802.11n (5 GHz)
23±1.5 dBm @ MCS0/8 20 MHz 18±1.5 dBm @ MCS7/15 20 MHz 23±1.5 dBm @ MCS0/8 40 MHz 18±1.5 dBm @ MCS7/15 40 MHz
Transmitter Power
Read more
Receiver Sensitivity for 802.11a
-90 dBm @ 6 Mbps -88 dBm @ 9 Mbps -87 dBm @ 12 Mbps -85 dBm @ 18 Mbps -81 dBm @ 24 Mbps -78 dBm @ 36 Mbps -74 dBm @ 48 Mbps -73 dBm @ 54 Mbps
Receiver Sensitivity for 802.11b
-89 dBm @ 1 Mbps -89 dBm @ 2 Mbps -89 dBm @ 5.5 Mbps -88 dBm @ 11 Mbps
Receiver Sensitivity for 802.11g
-88 dBm @ 6 Mbps -88 dBm @ 9 Mbps -88 dBm @ 12 Mbps -87 dBm @ 18 Mbps -84 dBm @ 24 Mbps -81 dBm @ 36 Mbps -77 dBm @ 48 Mbps -75 dBm @ 54 Mbps
Receiver Sensitivity for 802.11n (2.4 GHz)
-70 dBm @ MCS7 20 MHz -70 dBm @ MCS15 20 MHz -64 dBm @ MCS7 40 MHz -65 dBm @ MCS15 40 MHz
Receiver Sensitivity for 802.11n (5 GHz)
-69 dBm @ MCS7 20 MHz -70 dBm @ MCS15 20 MHz -64 dBm @ MCS7 40 MHz -66 dBm @ MCS15 40 MHz
WLAN Operation Mode
Client, Client-Router, Slave, Sniffer
Antenna
External, 2/2 dBi, Omni-directional, 2 RP-SMA male
Antenna Connectors
2 RP-SMA female
Ethernet Interface
10/100BaseT(X) Ports (RJ45 connector)
2
Standards
IEEE 802.1Q for VLAN Tagging IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X)
Ethernet Software Features
Management
DHCP Server/Client, HTTP, IPv4, LLDP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, Proxy ARP, Wireless Search Utility, VLAN, MXview, MXconfig
Security
HTTPS/SSL, RADIUS, SSH
Time Management
NTP Client, SNTP Client
Firewall
Filter
ICMP, MAC address, IP protocol, Port-based
Serial Interface
Connector
DB9 male
Serial Standards
RS-232, RS-422/485, RS-232/422/485
Operation Modes
Disabled, Real COM, RFC2217, TCP Client, TCP Server, UDP
Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
Parity
None, Even, Odd, Space, Mark
Flow Control
None, RTS/CTS, XON/XOFF
Baudrate
75 bps to 921.6 kbps
Serial Data Log
256 KB
Serial Signals
RS-232
TxD, RxD, RTS, CTS, DCD, GND, DTR, DSR
RS-422
Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w
Data+, Data-, GND
RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND
LED Interface
LED Indicators
SYS, LAN1, LAN2, WLAN, Serial
Input/Output Interface
Buttons
Reset button
Physical Characteristics
Housing
Metal
IP Rating
IP30
Dimensions
77.1 x 115.5 x 26 mm (3.035 x 4.55 x 1.024 in)
Weight
470 g (1.03 lb)
Installation
DIN-rail mounting, Wall mounting (with optional kit)
Power Parameters
Input Voltage
9 to 30 VDC
Power Connector
1 removable 3-contact terminal block(s)
Power Consumption
11.7 W (max.)
Reverse Polarity Protection
Supported
Environmental Limits
Operating Temperature
Standard Models: 0 to 60°C (32 to 140°F)Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Standards and Certifications
EMC
EN 61000-6-2/-6-4, EN 55032/24
EMI
CISPR 22, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF
Radio
ANATEL, EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-1137C, MIC, NCC, SRRC, WPC, KC, RCM
Road Vehicles
E mark E1
Safety
EN 60950-1, UL 60950-1
Vibration
IEC 60068-2-6
MTBF
Time
1,125,942 hrs
Standards
Telcordia SR332
Warranty
Warranty Period
5 years

Technical Resources

Loading...

Shipping

Shipping Overview
We work hard to process every order on the same day it is received. Lead time does not include processing time. If you place an order for items in-stock at our Kansas warehouse prior to 3 PM CST, it will likely ship by the following business day. We do our best to give priority to orders shipping via expedited methods. Items in stock at warehouses other than our Kansas facility will ship within 5-7 business days unless expedited shipping methods are selected at checkout. Expedited shipping outside of IA, IL, KS, MO, NE will be subject to a $250 handling fee. Lead time on items not in stock varies.

You can choose your preferred shipping speed during the checkout process. Items shipping from our Kansas warehouse will ship UPS. Items drop-shipping from a vendor may ship UPS, FedEx, or LTL. After you place your order, you will receive email correspondences from us when your order is received, fulfilled and shipped. Tracking information will be included with the shipping notification.

Shipping Regions
We currently ship to all 50 states in the United States.
If you need an item shipped overseas, we can ship it to a US-based exporter or freight forwarder of your choosing.

Ratings & Reviews

No reviews available

Be the first to Write a Review