Moxa - AWK-3131A-EU - WLAN AP/Bridge/Client

(0) No Reviews yet
SKU: AWK-3131A-EU
Moxa - Industrial 802.11a/b/g/n Access Point, EU Band, -25C to 60C
$944.00

Product Specifications

WLAN Interface
WLAN Standards
802.11a/b/g/n 802.11i Wireless Security
Modulation Type
DSSS MIMO-OFDM OFDM
Frequency Band for US (20 MHz operating channels)
2.412 to 2.462 GHz (11 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.745 to 5.825 GHz (5 channels)
Frequency Band for EU (20 MHz operating channels)
2.412 to 2.472 GHz (13 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
Frequency Band for JP (20 MHz operating channels)
2.412 to 2.484 GHz (14 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
Wireless Security
WEP encryption (64-bit and 128-bit) WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES) WPA/WPA2-Personal
Transmission Rate
802.11b: 1 to 11 Mbps 802.11a/g: 6 to 54 Mbps 802.11n: 6.5 to 300 Mbps
Transmitter Power for 802.11a
23±1.5 dBm @ 6 to 24 Mbps 21±1.5 dBm @ 36 Mbps 20±1.5 dBm @ 48 Mbps 18±1.5 dBm @ 54 Mbps
Transmitter Power for 802.11b
26±1.5 dBm @ 1 Mbps 26±1.5 dBm @ 2 Mbps 26±1.5 dBm @ 5.5 Mbps 25±1.5 dBm @ 11 Mbps
Transmitter Power for 802.11g
23±1.5 dBm @ 6 to 24 Mbps 21±1.5 dBm @ 36 Mbps 19±1.5 dBm @ 48 Mbps 18±1.5 dBm @ 54 Mbps
Transmitter Power for 802.11n (2.4 GHz)
23±1.5 dBm @ MCS0/8 20 MHz 18±1.5 dBm @ MCS7/15 20 MHz 23±1.5 dBm @ MCS0/8 40 MHz 17±1.5 dBm @ MCS7/15 40 MHz
Transmitter Power for 802.11n (5 GHz)
23±1.5 dBm @ MCS0/8 20 MHz 18±1.5 dBm @ MCS7/15 20 MHz 23±1.5 dBm @ MCS0/8 40 MHz 17±1.5 dBm @ MCS7/15 40 MHz
Transmitter Power
Read more
Receiver Sensitivity for 802.11a
-90 dBm @ 6 Mbps -88 dBm @ 9 Mbps -88 dBm @ 12 Mbps -85 dBm @ 18 Mbps -81 dBm @ 24 Mbps -78 dBm @ 36 Mbps -74 dBm @ 48 Mbps -72 dBm @ 54 Mbps
Receiver Sensitivity for 802.11b
-93 dBm @ 1 Mbps -93 dBm @ 2 Mbps -93 dBm @ 5.5 Mbps -88 dBm @ 11 Mbps
Receiver Sensitivity for 802.11g
-88 dBm @ 6 Mbps -86 dBm @ 9 Mbps -85 dBm @ 12 Mbps -85 dBm @ 18 Mbps -85 dBm @ 24 Mbps -82 dBm @ 36 Mbps -78 dBm @ 48 Mbps -74 dBm @ 54 Mbps
Receiver Sensitivity for 802.11n (2.4 GHz)
-70 dBm @ MCS7 20 MHz -69 dBm @ MCS15 20 MHz -67 dBm @ MCS7 40 MHz -67 dBm @ MCS15 40 MHz
Receiver Sensitivity for 802.11n (5 GHz)
-69 dBm @ MCS7 20 MHz -71 dBm @ MCS15 20 MHz -63 dBm @ MCS7 40 MHz -68 dBm @ MCS15 40 MHz
WLAN Operation Mode
Access point, Client, Client-Router, Master, Slave, Sniffer
Antenna
External, 2/2 dBi, Omni-directional
Antenna Connectors
2 RP-SMA female
Ethernet Interface
PoE Ports (10/100/1000BaseT(X), RJ45 connector)
1
Standards
IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1Q for VLAN Tagging IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1X for authentication IEEE 802.3 for 10BaseT IEEE 802.3ab for 1000BaseT(X) IEEE 802.3af for PoE IEEE 802.3u for 100BaseT(X)
Ethernet Software Features
Management
DHCP Server/Client, DNS, HTTP, IPv4, LLDP, Proxy ARP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, Wireless Search Utility, VLAN, MXview, MXconfig
Redundancy Protocols
RSTP, STP
Security
HTTPS/SSL, RADIUS, SSH
Time Management
SNTP Client
Unicast Routing
Static Route
Firewall
Filter
ICMP, MAC address, IP protocol, Port-based
Serial Interface
Console Port
RS-232, 8-pin RJ45
LED Interface
LED Indicators
PWR1, PWR2, PoE, FAULT, STATE, SIGNAL, WLAN, LAN
Input/Output Interface
Digital Inputs
2 Max. input current: 8 mA +13 to +30 V for state 1 +3 to -30 V for state 0
Alarm Contact Channels
Relay output with current carrying capacity of 1 A @ 24 VDC
Buttons
Reset button
Physical Characteristics
Housing
Metal
IP Rating
IP30
Dimensions
52.7 x 135 x 105 mm (2.08 x 5.32 x 4.13 in)
Weight
860 g (1.9 lb)
Installation
DIN-rail mounting, Wall mounting (with optional kit)
Power Parameters
Input Current
0.6 A @ 12 VDC, 0.15 A @ 48 VDC
Input Voltage
12 to 48 VDC, Redundant dual inputs, 48 VDC Power-over-Ethernet
Power Connector
1 removable 10-contact terminal block(s)
Power Consumption
7.2 W (max.)
Reverse Polarity Protection
Supported
Environmental Limits
Operating Temperature
Standard Models: -25 to 60°C (-13 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Standards and Certifications
EMC
EN 61000-6-2/-6-4
EMI
CISPR 32, FCC Part 15B Class B
EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 3 V IEC 61000-4-8 PFMF
Hazardous Locations
ATEX, Class I Division 2, IECEx
Radio
ANATEL, EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-WAPN008, MIC, NCC, RCM, SRRC, WPC, KC
Safety
EN 60950-1, UL 60950-1
Vibration
IEC 60068-2-6
MTBF
Time
570,854 hrs
Standards
Telcordia SR332
Warranty
Warranty Period
5 years

Technical Resources

Loading...

Shipping

Shipping Overview
We work hard to process every order on the same day it is received. Lead time does not include processing time. If you place an order for items in-stock at our Kansas warehouse prior to 3 PM CST, it will likely ship by the following business day. We do our best to give priority to orders shipping via expedited methods. Items in stock at warehouses other than our Kansas facility will ship within 5-7 business days unless expedited shipping methods are selected at checkout. Expedited shipping outside of IA, IL, KS, MO, NE will be subject to a $250 handling fee. Lead time on items not in stock varies.

You can choose your preferred shipping speed during the checkout process. Items shipping from our Kansas warehouse will ship UPS. Items drop-shipping from a vendor may ship UPS, FedEx, or LTL. After you place your order, you will receive email correspondences from us when your order is received, fulfilled and shipped. Tracking information will be included with the shipping notification.

Shipping Regions
We currently ship to all 50 states in the United States.
If you need an item shipped overseas, we can ship it to a US-based exporter or freight forwarder of your choosing.

Ratings & Reviews

No reviews available

Be the first to Write a Review