Moxa - Layer 2 Managed Switch
SKU
CM-600-4MST
Contact For Lead Time
Moxa - Fast Ethernet interface module with 4 100BaseFX multi-mode ports, ST connectors, -40 to 75C operating temperature
$1,285.07
Ethernet Interface
-
10/100BaseT(X) Ports (RJ45 connector)
- Auto negotiation speed
Full/Half duplex mode
Auto MDI/MDI-X connection
- Auto negotiation speed
-
100BaseFX Ports (multi-mode ST connector)
- 4
-
Optical Fiber
-
100BaseFX Multi-Mode Single-Mode Fiber Cable Type OM1 50/125 µm G.652 800 MHz x km Typical Distance 4 km 5 km 40 km Wavelength Typical (nm) 1300 1310 TX Range (nm) 1260 to 1360 1280 to 1340 RX Range (nm) 1100 to 1600 1100 to 1600 Optical Power TX Range (dBm) -10 to -20 0 to -5 RX Range (dBm) -3 to -32 -3 to -34 Link Budget (dB) 12 29 Dispersion Penalty (dB) 3 1 Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power.
Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB).
-
Power Parameters
-
Power Consumption
- 2.44 W (max.)
Physical Characteristics
-
IP Rating
- IP30
-
Dimensions
- 29.7 x 144.4 x 144.8 mm (1.17 x 5.69 x 5.7 in)
-
Weight
- 240 g (0.53 lb)
Environmental Limits
-
Operating Temperature
- -40 to 75°C (-40 to 167°F)
-
Storage Temperature (package included)
- -40 to 85°C (-40 to 185°F)
-
Ambient Relative Humidity
- 5 to 95% (non-condensing)
MTBF
-
Time
- 740,661 hrs
-
Standards
- Telcordia (Bellcore), GB
Warranty
-
Warranty Period
- 5 years
-
Details
Copper Port Speed
10/100 Mbps
Fiber Connector
ST
Fiber Mode
FX multi-mode
Technical Resources